Rust Proofing Wax Injection Gun And Unifine Underseal Undercoating Gun Waxoyl

Description

Rust Proofing Wax Injection Gun And Unifine Underseal Undercoating Gun Waxoyl
Description
Professional tool for commercial or occasional use
2pc set one of the items is an air pressurised canister type (in which you put the liquid straight into) and the other is an air powered one in that you screw it onto any of the 1 litre cartridges
With this kit you get the best of both scenarios, one is a professional tool where as the other is a lightweight tool suitable for a quick spray
WAX INJECTION GUN DESCRIPTION
Professional undersealing / injection gun suitable for garage or workshop use
Pressurised pot system ensures an even mist spray with even the thickest mediums / liquids
The pot is pressurised with high air pressure up to 90 psi and this pressure then forces the material up and out through the nozzle
Most underseal sprayers rely on blowing air across the top to suck up the material or use a lot lower pressure to spray the material and this causes them to clog up especially on thicker mediums. With this particular tool the underseal is being forced out at high pressure making it very unlikely to clog up.
With the pressurised system this also means that extension probes can be used without loss in performance
Suitable for a wide variety of underseal
Can use the waxoyl and it will spray without the need to thin the underseal to spray unless its cold.
Pressurised pot system also ensures a more and even consistent spray
THE WAX OYL GUN HAS 3 WAYS IN WHICH IT CAN SPRAY
1.
MIST SPRAY NOZZLE ON GUN
- Using the gun on its own gives a normal standard spray pattern, this is used for general areas such as floor pans etc
2.
BALL SPRAY EXTENSION NOZZLE
- Suitable for spraying inside cavities, chassis box sections etc The laser cut fine atomisation nozzle is fitted on a 3ft extension probe which allows it to be fed into a cavity to spray inside, the nozzle achieves a very fine mist spray of underseals suitable for searching between the closest panels
3.
ACCURATE FLAT SPRAY EXTENSION NOZZLE
- This is a high volume spray nozzle on a 2ft - 6" extension probe for thick coverage in wheel arches and other vulnerable areas, this is a more controlled spray than with the mist nozzles and it is easier to spray areas without covering parts you do not want to underseal. This is especially useful to use where there is limited space under the wheel arches
Comes with a 1/4" BSP male air inlet for quick and easy connection
BOX INCLUDES THE FOLLOWING
Pressure pot underseal / wax injection gun
1 x quick release adaptor for extension probes
Ball spray extension probe
Flat spray extension probe
1 x spare seal kit
UNIFINE AIR UNDERSEAL / UNDERCOATING GUN
Professional tool for commercial or occasional use
Suitable for the application of under body sealant Schultz
Air powered undersealing gun
Fits most standard 1 litre containers
Ideal for applying many types of coatings including anti stone chip, Schultz, underseal, wax oyl, cavity wax products and texture sprays
Simple trigger action operation
1/4" BSP male air inlet so will fit all standard airline fittings
Average air consumption 4 cfm
Spray distance 12" - 18"
We have more products available in our store
Click Here